To Beard or not to Beard? That’s a good Question!

44 comments on “To Beard or not to Beard? That’s a good Question!”

Comments listed below are posted by individuals not associated with CDC, unless otherwise stated. These comments do not represent the official views of CDC, and CDC does not guarantee that any information posted by individuals on this site is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. Read more about our comment policy ».

great information

Hi, everybody.
In the Brazil, we have a book (by deceased Dr Maurício Torlini), that wich brings great informations about this issues. PROGRAMA DE PROTEÇÃO RESPIRATÓRIA – Recomendação, seleção e uso de respiradores.

Great resource to assist those that are in need of ensuring they remain protected! Thanks and please repost again ahead of Every Movember!

Facial hair of our some packer is one of our concern here, at our flour packing section in Saudi Arabia, we can not impose of policy not to have a beard because it is their culture in Islam country like KSA. My question is, is there a protection for this beard to prevent fallen hair into the bag of flour?

beard net

This is a great article and the graphic is very useful for showing the facial hair styles that are, are not, and may be acceptable. It is an constant battle with the popularity of facial hair and all the TV shows that feature highly talented guys with beards and goatees wearing tight-fitting respirators while they sand and paint cool cars and trucks. The public sees this and assumes it must be OK, or else how would they be allowed on TV?

The problem is getting acute. More so, where highly toxic gases, like hydrogen sulphide, are involved. Therefore, those who are very conscious of their looks should rather think of quitting “hazardous” professions and enter some clerical or similar jobs. By doing so,, they will be helping their fellow workers, also.
K. N. Krishna Prasad, Chartered engineer; OHS Consultant & Trainer, Mysuru, India.

Why don’t you consider the alternatives to close fitting face masks rather than imposing restrictions on workers?

Thank you for your comment. The blog notes “A second option is to consult with your Respiratory Protection Program Manager about respirator selection options. In some work environments, a loose-fitting respirator, such as a powered air-purifying respirator (PAPR), is an option. As we mentioned in another recent NIOSH Science Blog, Understanding respiratory protection options in Healthcare: The Overlooked Elastomeric, loose-fitting PAPRs may be used when fit testing fails or when facial hair is present. However, this may not be a feasible option for all beard-eager professionals out there.”

PAPRs cost more and involve additional logistical challenges compared to disposable N95 filtering facepiece respirators. Some loose-fitting PAPR models provide less protection (APF = 25) than other types of respirators (e.g., full facepiece APR with APF = 50).

Hello, I am an occupationnal Hygienist and I am in charge of the respiratory program for the maritime employer association in Montreal (MEA). Can I get a high resolution picture of your brilliant infographic : facial air style ?

It will be perfect to show to my employee (mainly french speaking lognshoremen) what is acceptable and what is not ?

Thank you

Hi Rémi,
Did you happen to find a version in French.
I am looking for a bilingual French/English version and thought you may have had some success in this area.

Adrian

I really love beard

This was such a great read! Could I also get a high resolution copy of the facial hair styles?

We are happy to hear about the interest in the Facial Hair Styles image on the blog. Here is a link https://www.cdc.gov/niosh/npptl/images/infographics/FacialHairWmaskLG.jpg
to a high resolution copy that can be printed and posted. We have updated the image with additional information (i.e. implications for respirators with exhalation valves) and have included the updated image in the blog above.

I agree with Remi and Judith above, can you provide a hi-res picture of the infographic??

Thank you for your interest. The image can be accessed at https://www.cdc.gov/niosh/npptl/images/infographics/FacialHairWmaskLG.jpg

Comments are very good, but we have to take into account the work colleagues, their personal appearance when using a beard that is everyone’s question, but not for the use of tight masks, sometimes we are working with highly dangerous materials, and the mask that they would also use the men does not keep it from contamination,

Great article. Am updating my H2S/CO Life or Death Course and this is perfect timing for my update.

Thank you for your article and graphic. I am the safety officer at a chemical company that has recently implemented a ‘clean shaven other than small moustache’ policy. The storm that has erupted has not been easy to weather but I am thankful that upper management has agreed that it is a small price to pay to ensure our employee’s safety!

Why do we see so many EMS teams such as fire fighters, EMT’s and HAZMAT teams members with beards that may be required at any moment to wear a respirator?
How do facilities get around 1910.134 when considering these teams?

I can’t see how the Anchor, Balbo or Goatee can “not” cross the seal, no matter how careful you try. It is easy in my field, real firefighters don’t have beards.

In these 3 styles, the underside of the jaw is shaved. So the beard fits entirely inside the mask, and there’s a good seal at the edge.

I work in healthcare, and TB is the big concern for us. I have a couple of questions because I am not of the I’ll that N95 masks provide sufficient protection to us. Our facility abolished the use of PAPRs because they claimed that the external fan was a threat to the steril field. This is significantly less air than a Bair Hugger blowing warm air produces, and in some of our orthopedic cases they do in fact use contained suits to minimize the potential for infection, and they too have an external blower device. There was a great article published about 2 years ago in an infection control journal that found that the PAPRs are not a threat to sterility, and so I wonder why they haven’t come back as an alternative to the N95 for those of us who failed the fit test. I suspect it has everything to do with cost of PAPR upkeep. Secondly, when donning an N95 mask, you may have a sealed fit under static conditions, but the moment you wiggle your nose or speak to an attending physician the seal is disrupted and likely fails to protect the user. Can you provide any insight as to the responsibility of the employer to provide safe means for their employees to care for droplet precaution patients? I feel as though my employer isn’t providing appropriate protection and I’m expected to enter those ORs.

Thank you for your question. Because your question mentions sterile fields, we assume that it relates specifically to work in settings such as operating rooms, which are different from general patient rooms. There is certainly potential for exposure to infectious small-particle aerosols in operating rooms. Aerosol-generating procedures include intubation, open suctioning, use of power tools such as drills and saws, etc. A comprehensive approach is needed to protect against infectious disease transmission through the air by small particle aerosols in this setting. If possible, it is best to delay surgery on patients with contagious diseases potentially transmitted via small particle aerosols until they are no longer infectious. It is also important to have appropriate engineering controls in place, such as adequate ventilation. As you note, respiratory protection for those sharing the same airspace with such patients is also important.

The appropriate respiratory protection in these settings provides protection against inhaling small airborne particles, such as infectious droplet nuclei. Generally, filtering facepiece respirators specifically approved for use in the surgical setting are the type of respirator used. You can find extensive information about them on NIOSH’s Respirator Trusted-Source Information website found at https://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/respsource.html. You indicated that you were unable to pass the fit test conducted by your employer. If the specific model and size of N95 filtering facepiece respirator offered by your employer did not fit well enough to pass a fit test, other sizes and models should be tried. A list of surgical N95 respirators approved for use in surgical settings is maintained by NIOSH on this web page: https://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/respsource3surgicaln95.html. Your employer’s occupational health staff and/or respiratory protection program manager should be able to work with you to find a respirator that fits, as required in OSHA’s regulations at 29 CFR 1910.134, which specify that the employer shall provide respirators which are applicable and suitable for the purpose intended.

As you mention, powered air-purifying respirators (PAPRs) equipped with appropriate filters can also be used to protect against small particle aerosols. In addition, loose-fitting PAPRs have the advantage of not requiring fit testing. We are not sure which scientific article you are referring to in your question, however, current recommendations from OSHA do not allow for the use of PAPRs when a sterile field is required. As noted on page 25 of the Hospital Respiratory Protection Program Toolkit found on the OSHA website, there are concerns about the risk for contamination of sterile fields by air exhausted from PAPRs https://www.osha.gov/Publications/OSHA3767.pdf. However, as described in that document, PAPRs can be used in other healthcare settings where maintaining sterile fields is not a concern and are an option for use in those settings if for some reason you can’t identify an N95 filtering facepiece respirator that fits.

We hope this information is helpful to you.

thats a funny and important topic To Beard or not to Beard, I like the article and I think it is benefcial with all the information provided and all comments is great , thanks to the author for sharing with my best regards.
Joe Ismail

goatee does not come in contact with the seal of an n95 for nurses

Nice article and nice question too…I always preferred to be with beard

Hello. I noted that the article you cited was a summary of research pre-dating 1988. There has been significant changes to PPE in the past 30 years, and the soft silicone masks may provide an adequate seal with a beard, if fitted properly and tightened firmly. These masks are much more pliable than masks from three decades ago. I have experienced this in practice and it is supported by current research (see: J Occup Environ Hyg. 2018 Apr;15(4):334-340. “Influence of facial hair length, coarseness, and areal density on seal leakage of a tight-fitting half-face respirator”.) This is not a one-size-fits-all approach, literally: (Crit Care Resusc. 2010 Mar;12(1):24-7 – “Particulate face masks for protection against airborne pathogens – one size does not fit all: an observational study”), and different situations may require very different responses. An individual should be fit-tested, know what a proper seal is and how to test for it (as you describe in your article), and know the filtration levels they require. I would suggest to readers that clean-shaven or not, if an absolute seal is required and the risk is high, a half-mask alone is not adequate regardless. Absorption through the eyes and skin of the face are a potential vector for exposure (consider biological, chemical, etc). Further, a half-mask does not filter expired particles, and thus contamination from the wearer to the patient or environment is possible. I just wanted to chime-in here as I have been able to achieve positive and negative air pressure checks with a beard using modern silicone masks pulled tight. And current research supports this. I will also point out that the same new research found that “stubble” did not create any significant Fit Factor change from a clean shave; which runs contrary to your chart and the 1988 article. This new information may be of value to those who need filtration but have a beard, organizations who may be excluding employees from certain tasks based on an old article(s), or those home hobbyists needing cost effective protection for simple tasks.

Thank you for your comment. Your comment says that employers “may be excluding employees from doing certain tasks” due to stubble, “based on an old article(s).” However, the requirements are based on federal regulation. The Occupational Safety and Health Administration (OSHA) Respiratory Protection Standard (29 CFR 1910.134(g)(1)(i)) state “the employer shall not permit respirators with tight-fitting facepieces to be worn by employees who have: (A) Facial hair that comes between the sealing surface of the facepiece and the face or that interferes with valve function; or (B) Any condition that interferes with the face-to-facepiece seal or valve function.” OSHA’s Fit Testing Procedures, 29 CFR 1910.134 Appendix A, Part I, (A)(9), states “The test shall not be conducted if there is any hair growth between the skin and the facepiece sealing surface, such as stubble beard growth, beard, mustache or sideburns which cross the respirator sealing surface. Any type of apparel which interferes with a satisfactory fit shall be altered or removed.” Therefore, by regulation, employees working for employers covered by federal or a state OSHA must be clean-shaven in order to wear a respirator with a tight-fitting facepiece.

In the study you cite, the Floyd article, the authors note in the discussion section, that the study had limitations:
1. Only 19 subjects were used which may not have represented the various ethnic backgrounds of actual respirator wearers
2. A single elastomeric half-facepiece model was used which may not be representative of all NIOSH-approved half-facepiece models
3. The fit test was performed did not have grimace and bending over exercises
4. The quantitative fit test used may have underestimated the particles in the in-facepiece sample.
Since this is just one limited study, it should not be interpreted that wearing a tight-fitting half-facepiece elastomeric respirator with facial hair is acceptable, nor that the wearer will receive the expected level of protection in the workplace. This study would not be sufficient justification for recommending a change in the OSHA Respiratory Protection Standard.

In regards to your other points, if the contaminant(s) in question is an eye irritant, then a respirator equipped with a full facepiece, helmet, or hood is recommended. For healthcare situations where you are concerned for “contamination from the wearer to the patient or environment,” then you ought to consider using respirators without exhalation valves such as those jointly approved by NIOSH and FDA as surgical N95 (https://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/respsource3healthcare.html).

Hello Mr. Coffey. The point I am making is that there is current research which disagrees with old data. I am not debating the existence of OSHA or NIOSH policy. But I am pointing out that those policies, and many opinions (such as yours) seem to be based on tests done 30 to 35 years ago. I think we can agree that there are many regulations, federal or otherwise, that rest on outdated information. NIOSH and this very CDC article cite those same old studies. These past ideas are something that should be re-examined based on current standards. Keep in mind the technology of those times, and the “bias” toward beards and certain cultures in the 80’s. I like that you mentioned various ethnic backgrounds and masks were not sampled in the study, which is the exact reason why I also mentioned the 2010 article — where one size does not fit all. Hence, how can an organization make a blanket policy that no beard, and no face type, regardless of mask-style, can achieve a proper fit? Where is the data to support this grandiose claim? It is a policy of convenience, nothing more. I kindly suggest that there are two options: one is to stick with status-quo, and continue with a blanket policy refusing almost all facial hair. The second is to evaluate new research, adjust our policies accordingly, and check each employee for fit. One is easy to implement, but arbitrary. The other requires work, but will be more inclusive and accurate.

When information is never tested or challenged, our viewpoints never change. You stated it is “just one limited study”.
Which is true… until it isn’t any more.
(http://www.sfu.ca/sfunews/stories/2018/09/sfu-study-busts-myth-about-facial-hair-on-pilots-.html.)

Oh, I wanted to add one more thing in response for the sake of those reading: Mr Coffey pointed out the study I mentioned had four “limitations”, took time to list them, and later called it a “limited study”; with the implication that this was all a bad thing. What we’re talking about here are variables. In fact, controlling experimental variables is absolutely vital to a good experiment. Variables are controlled by design. This study looked at hair length, thickness, and density, which was already a lot. To add even more factors such as body movement, ethnicity, or different mask types would have confounded the results, rendering the information useless. These factors can be manipulated in different experiments, but I strongly disagree with the insinuation that by controlling variables the study was somehow flawed or the data invalid.

Great Stuff Folks! I’m the RPPM at Camp Lejeune and my civilians always try to slide by my Orders and requirements. Thank you NIOSH and CDC!

Question:
I am wondering whether the chart with the “yes”/ “no” depending on the beard type is not to restrictive?
N95 means that 95% of the dust is filtered. I have read that some studies indicated that the beard causes on average a leakage of 8%. (=87%) The math indicates a better filtration than a P1 European dust mask (certified 75% filtration) on a shaven person.
So it is possible that an N95 mask with beard filters more than 60% of the dust? Could this be sufficient under specific circumstances? So is the chart with the yes no depending on the beard type not to restrictive?

We think the chart is a reasonable characterization of the situation. Facial hair does not act as a crude filter to capture particles that pass between the respirator sealing area and the skin, While human hair appears to be very thin to the naked eye, hair is much larger in size than the particles inhaled. Facial hair is just not dense enough and the individual hairs are too large to capture particles like an air filter does. Therefore, the vast majority of particles follow the air stream right through the facial hair and into the lungs of the wearer. Some studies have shown that even a day or two of stubble can begin to reduce protection. Research tells us that the presence of facial hair under the sealing surface causes 20 to 1000 times more leakage compared to clean-shaven individuals.

About being excluded from caring a respiratory patient or using the PAPR if Fit test is not passed , this is applied only when dealing with air born infection or even when dealing with droplet infection??

Only powered air-purifying respirators (PAPRs) with tight-fitting facepieces are required to be fit tested by the Occupational Safety and Health Administration. PAPRs that have respiratory inlet coverings which do not rely on a tight seal to the facepiece to provide the expected level of protection (such as PAPRs with hoods) are not required to be fit tested and can be used with facial hair. For treating patients with suspected or confirmed infectious disease requiring airborne precautions (e.g., measles, tuberculosis), a NIOSH-approved respirator such as a hooded PAPR should be used. For patients with suspected or confirmed infectious disease requiring droplet precautions (e.g., pertussis), the minimum level of protection is a surgical mask which does not have to be fit tested. (https://www.cdc.gov/niosh/npptl/pdfs/N95-Infographic-REACH-II-508.pdf).

For employees who claim a religious exemption from trimming beard, do the employers cover the cost of a PAPR, split the cost or make the employees pay for them? Do you have have any resources for healthcare institutions that have policies regarding who pays for the PAPR in cases of religious exemption from grooming?

This is actually a question for OSHA. You can see their response to a related question at https://www.osha.gov/laws-regs/standardinterpretations/2011-08-05 or contact OSHA directly at 800-321-6742 (OSHA) or https://www.osha.gov/ecor_form.html

“Toothbrush” so that’s the PC term!

I am the Walrus!

Now that someone that did not fit your stringent criteria has tested positive for Covid19. Are you goin to open testing to find out the real picture of transmission ? Or stick with if you don’t test you won’t have it ?

Due to the nature of your inquiry and it’s relation to Coronavirus Disease 2019 (COVID-19), please visit CDC’s COVID-19 website where you can find the most up-to-date information on the outbreak and get the latest answers to frequently asked questions. You can also contact CDC-INFO or by calling 800-232-4636.

I think you need to change the Fu Manchu label to something not racist

The styles listed in the infographic came from the World Beard and Moustache Association. We certainly would not want to offend anyone. We have edited the infographic to address feedback you and others provided.

Post a Comment