Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

The Silica/Asphalt Milling Machine Partnership – All Good Things Need Not Come to an End

Posted on by Duane Hammond, MS, PE

OLYMPUS DIGITAL CAMERA

A recent ceremony at World of Asphalt 2015 celebrated the success of the Silica/Asphalt Milling Machine Partnership’s accomplishments to develop and validate engineering controls for silica dust in asphalt milling operations. The partnership between government, industry, labor was coordinated by the National Asphalt Pavement Association over the past decade to design, test, and implement engineering controls for asphalt milling machines to effectively reduce potential silica exposure below NIOSH’s recommended exposure limit (REL) of 0.05 mg/m3.

Approximately 367,000 U.S. workers are employed in highway, street, and bridge construction and are at risk of exposure to respirable crystalline silica.[i] Workers use a variety of machinery when removing and recycling asphalt pavement including a cold-milling machine which has toothed, rotating cutters that grind and remove pavement for recycling. Workers can breathe in the dust generated from the cold-milling machines which often contains respirable crystalline silica. Breathing respirable crystalline silica can cause silicosis, a debilitating and potentially fatal lung disease.

One product of the Partnership is the NIOSH document, Best Practice Engineering Control Guidelines to Control Worker Exposure to Respirable Crystalline Silica during Asphalt Pavement Milling, which provides recommendations that include ventilation controls in addition to water sprays used to cool the cutting teeth of milling machines, lessening silica dust exposure. The document also provides machine manufacturers guidance for evaluating current and future dust controls.

The Partnership has been lauded as the gold standard for industry, labor, and government cooperation like the Asphalt Paving Partnership before it. If those involved in the Partnership would like to provide comments below on what made this such a unique endeavor, we would love to hear them. We would also be interested in hearing from you if you think your industry could benefit from a similar collaboration.

 

Duane Hammond, MS, PE, is a Mechanical Engineer in the NIOSH Division of Applied Research and Technology.

[i] U.S. Census Bureau [2007]. Industry statistics sampler. NAICS 237310. Highway, street, and bridge construction. Washington, DC: U.S. Department of Commerce.

 

Posted on by Duane Hammond, MS, PE

3 comments on “The Silica/Asphalt Milling Machine Partnership – All Good Things Need Not Come to an End”

Comments listed below are posted by individuals not associated with CDC, unless otherwise stated. These comments do not represent the official views of CDC, and CDC does not guarantee that any information posted by individuals on this site is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. Read more about our comment policy ».

    The silica/asphalt mill, is something really interesting, specially in all this remote areas. In Mallorca, we have done a test with a similar system with excelent results

Post a Comment

Leave a Reply to john Cancel Reply

Your email address will not be published.

All comments posted become a part of the public domain, and users are responsible for their comments. This is a moderated site and your comments will be reviewed before they are posted. Read more about our comment policy »

TOP